Ricoh SC560 Error Code
The low-voltage power supply side of the machine reported a fault. Without stable internal power, the machine will not run.
Power
What This Means in Plain Terms
The low-voltage power supply side of the machine reported a fault. Without stable internal power, the machine will not run.
A brief power dip, a bad outlet, or an internal supply fault can trigger this. One careful restart is reasonable; repeats are not a DIY project.
Safe things you can try
- Turn the machine off.
- Unplug it, wait 30 to 60 seconds, and plug it into a known-good wall outlet.
- Avoid shared extension cords or overloaded strips if possible.
- Turn the machine on once.
Do not do these
- Do not keep restarting through a brownout or flickering lights.
- Do not open the power supply enclosure.
Never enter service mode or clear safety codes yourself. Those steps can damage the machine or leave a safety lock uncleared.
When to call for service
If SC560 returns after a clean power cycle on a stable outlet, the power supply needs service.
Reference: Ricoh GSD status-message guidance. Guidance summarized for San Diego County offices; model details can vary.
All error codes· Troubleshooting checklist· IM C series models
Still Seeing the Code?
Tell us the exact code, model, and what you already tried. We will get back to you soon.